Programmable Xenon Test Equipment , ASTM D 2565 Weatherproof Xenon Arc Chamber

ASTM D 2565 Programmable Xenon Arc Lamp Weatherproof Test Chamber

I. Application

Xenon lamp test chamber uses xenon arc lamp which can simulate all sunlight spectrum to reproduce destructive light wave in different environment. It can provide corresponding environment simulation and accelerated test for scientific research, product development and quality control. Xenon lamp test chamber can be used to select new materials, improve existing materials or evaluate the durability of materials after composition changes in the test, is a good simulation of different environmental conditions that materials exposed to sunlight changes.

2. Standards

GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTM D2565

Comply with GB/T16585-1996, GB14522-93, GB/T16422.3-97 and ASTM D2565 standards.

3. Main technical parameters

3.1Humidity deviation: + 2.5% R.H (Humidity≥75%R.H), + 3% R.H (Humidity ≤75%R.H) (without light)

3.2 Types of Light Sources: imported air-cooled all-solar spectral long arc xenon lamp (average service life of 1600 hours or so)

3.3 Rainfall time: 1~9999 minutes, adjustable.

3.4 Rain cycle: 1~240 minutes, interval (break) adjustable

3.5 Light source wavelength range: 300-800nm

3.6 Humidifying power: about 2KW

3.7 Light source irradiance: 290~800nm: 100~600w/m2

300~890nm: 200~1200w/m2

340nm: 0.3~1.2w/m2

420nm: 20~120w/m2

3.8 Distance between arc center to sample frame: 350 ~ 380mm

3.9 Rotating speed of sample basket: ≥1r/min

3.10 Water spray cycle:

Water spray time: 0 ~ 99h59min, continuous adjustable

Stop time: 0 ~ 99h59min, continuous adjustable.

3.11 Lighting time: continuous programmed control.