ZONSKY INSTRUMENT CO.,LTD
ZONSKY INSTRUMENT CO., LTD Professional Test Equipment Manufacturer
Add to Cart
Simulated Solar Radiation Environmental Test Chamber
I. Application
Xenon lamp test chamber uses xenon arc lamp which can simulate all sunlight spectrum to reproduce destructive light wave in different environment. It can provide corresponding environment simulation and accelerated test for scientific research, product development and quality control. Xenon lamp test box can be used to select new materials, improve existing materials or evaluate the durability of materials after composition changes in the test, it can be a good simulation of different environmental conditions, materials exposed to sunlight changes. Meet the criteria: GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTM D2565.
2. Standards
GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTM D2565
Comply with GB/T16585-1996, GB14522-93, GB/T16422.3-97 and ASTM D2565 standards.
3. Temperature and Humidity Operation Control System
Controller: imports programmable full touch 7 inches
Accuracy range: setting accuracy: temperature (±0.1℃), humidity (±2% R.H), indicating accuracy: temperature (±0.1℃), humidity (±1% R.H)
Temperature and humidity sensor: platinum resistance.PT 100 Omega / MV
Blackboard temperature: bimetallic blackboard thermometer
The water supply system: humidified by automatic control, and xenon lamp is used for cooling and circulating water.
Circulatory system: heat resistant and low noise air conditioner motor. Multi leaf centrifugal wind wheel.
The control system: mainly composed of operation panel, central controller, various key switches, status indicator lights, executive electrical appliances and so on.
| External dimension | W x D x H: 1050 x 1050 x 1750 mm |
| Internal dimension | W x D x H: 500 x 500 x 600 mm |
| Temperature range | 0℃～80℃ |
| Temperature deviation |
±2℃ (without illumination) |
| Humidity range | 30 ~ 98% R.H |
| Spectral wavelength | 300nm ~ 800nm |
| Xenon lamp power | 1.8KW |
|
Life span |
1600 hours |
| Blackboard temperature | 85±3℃ |
| Power | About 4KW; 220V±10%, 50HZ |
5. The Electrical Control Part Of The Test Box
This part is the core part of the test box.
The main switch of the power supply is an air pressure switch, which controls the whole circuit part.
Safety protection measures of the electronic control part: when the control system detects the following protective devices (single row) action, it should be able to automatically cut off the whole system, and can give an alarm prompt;
The workshop is over temperature protected.
Power shortage and leakage protection;
The motor is over-current protection.
The overpressure / overload protection of the refrigerator.
Heater / humidifier short circuit / overload protection;
Fuse fusing protection;